Description from Thomann
4x t.akustik WAS-7 Melamine GR Absorber Panel Set -
Absorber for improving a room's acoustics -
Absorber profile: Spikes -
The precisely cut tiles allow combining and assembling different "the t.akustik" models (for example, WAW-7) -
The absorption efficiency is increased by a special design -
The correct use of the absorber reduces flutter echoes -
Optimises room acoustics and gives the room a professional atmosphere -
Main effective range: from approx. 800 Hz -
Material: Melamine resin foam -
Fire behaviour according to EN13501-1, Euroclass B s-1, d-0: Flame retardant -
Sound absorption coefficient: >0.9 from approx. 600 Hz -
Dimensions (L x W x H): 600 x 600 x 70 mm -
Colour: Grey -
Set contains 8 individual pieces -
Suitable adhesive: Article no. 481723 (not included in the delivery)
2x t.akustik WDS-7 Diffuser Set 8pcs Diffuser -
Set of 8 -
For the optimization of room acoustic -
Sound radiation behavior is optimized by a special design -
Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio -
Lightweight diffuser is easy, non expensive and comfortable to install -
Can be painted with water-based paints (must not contain solvents!) -
Bulk density: 20 kg/qm -
Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1 -
Material: EPS (Expanded Polystyrene) -
Colour: White -
Dimensions: 600 x 600 x 70 mm -
Set includes 8 pieces -
For mounting and fixing acoustic adhesive is recommended: Article Nr. 177265
20x t.akustik CBT-37 Melamine GR Absorber Plate Set -
Absorber for optimising acoustics -
Especially suitable for the absorption of low frequency sound waves -
Material: Melamine resin foam -
Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant -
Sound absorption coefficient: > 0.9 from approx. 600 Hz -
Dimensions (L x W x H): 370 x 370 x 600 mm -
Colour: Grey -
Set contains 2 individual pieces
Thomann Hand-Kartuschenpistole Hand sealant gun -
For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately) -
Hexagonal plunger rod -
Red lacquer finish
17x t.akustik Contact Glue Acoustic Adhesive -
For acoustic convoluted, pyramids and basotect -
Solvent-free -
Elastoplastic -
Single-component special polymer adhesive -
Fast-curing and more universal than structural and assembly adhesives -
Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam -
Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood -
310 ml/ 490 g Cartridge -
For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over) -
Note: Working temperature + 5° C to + 50° C -
Storage: Cool and dry at + 5° C to + 25° C -
Skin building time: 10 - 15 min -
Colour: White -
Consistency: Pasty -
Base: Polymer dispersion -
Spec. mass: Approx. 1.58 g/cm -
Protect from frost and heat -
Suitable hand-held cartridge gun: Article Nr. 417630 (not included) -
New follow-up product: Article Nr. 481723 (not included)
|