Load-ins and load-outs are undoubtedly the worst part of the gig. Either you're sweating before you play or dreading the number of trips you'll have to make after the gig through narrow corridors, cellars, and staircases, or the length of several football fields. Rock n Roller's … $129.99
The Raxxess Economy Vent Panel is an inexpensive flanged panel for passive cooling. The panel is constructed from 16-gauge, cold-rolled steel with a smooth finish. $8.99
The Raxxess wall mount Studio Cable Depot is a 16-gauge steel cable reorganizer that keeps cabling off the floor, out of the way and tangle-free. Fourteen fingers extend to hold up to forty cables. Maximum cable diameter is 1/4". $9.99
Measuring 1/8" thick, this all-steel RRF rack rail is threaded for 10/32"-diameter rack screws. With full hole spacing, they are sold in pairs and designed for use with 19-1/8"-wide rough openings. Durable black powder coat finish. Used by many professional rack and road case man… $9.99
One space, 14-gauge shelf has a hole pattern in bottom for mounting a variety of half-rack equipment. Comes with 2 each 3/16", 1/4", and 5/16" machine screws. Finished in durable, black baked enamel. $14.95
The ZM-99 caster kit allows any Z stand or workstation to be more portable and easier to move around. The kit comes with 2 locking and 2 non-locking casters and is simple to install. Fits all Quik-Lok Z stands and workstations.Note: Please allow for an additional 2.5" to the heig… $15.99
16-gauge cold-rolled steel shelf allows the rackmounting of otherwise non-rackmountable equipment. One-piece construction. Finished in durable black baked enamel. $17.99
10-32 x 3/4" Phillips pan head screws integrated with nylon cup washers to save you the trouble of fumbling with separate parts allowing for faster installation of equipment. 100 pieces. $19.95
Raxxess SEC security covers prevent tampering with equipment. The covers are made of 16-gauge perforated steel. These security covers feature one-piece construction to avoid use of welded on ears; black baked enamel finish; 1" offset to clear knobs; and a neoprene gasket to preve… $19.99
This large, clamp-on utility tray is incredibly convenient for keeping equipment right where you need it. The MS-329 uses a heavy, thick metal clamp to securely attach to the mast of any standard mic stand and the rubber-tipped 8mm lock screw will not strip-out when tightened or … $22.99
This is a set of 4 Ernie Ball pop-out, socket-mounted casters, measuring 2" in diameter with a 7/8" Ruberex wheel. Double ball bearing, split-level, nickel-plated steel construction offers superior swiveling and weight dispersion. The casters' friction grip stem is precision-form… $24.00
Accessory bar for the Z-716L. The Z-720L is needed to support either the Z-714, Z-727, Z-729 or Z-730 options. Included with Z-726L. Note - only one of these options can be used at a time. $24.99
Provides side-by-side mounting of any 2 - 300 Series units in a standard 1U space. Mounts units flush front or recessed to protect knobs. Mounting screws are included. $29.00
Convenient 4-space rack equipment holder mounts securely underneath any Z stand crossbar or lower crossbar of any Z workstation. Holds power amps, outboard gear, tone generators, samplers, synths any rackmountable equipment.The ZM-91 or ZM-93 can be safely mounted directly above … $29.99
Optional perforated steel shelf attaches easily onto crossbar of Z stands and workstations (except Z-722 and Z-722L). The off-center design allows it to be mounted either closer or further away from user. Available in black only. $29.99
Raxxess' rack rail is 11-gauge steel full-hole rack rail. The rail is punched and tapped for 10-32 screws. The black baked enamel rack rail features side-mounting holes punched in every space and is sold in pairs. $29.99
The Proline tripod speaker stand features a center steel shaft for maximum support and an aluminum body for lighter weight. Locking pins are included for extra safety. 150-lb. capacity. Fits 1.375" or 1.5" speaker mounts. Height adjusts from 45"-73". $37.99
Measuring 1/8" thick, Middle Atlantic s all-steel RRF rack rail is threaded for 10-32 screws. With full hole spacing, they are sold in pairs and designed for use with 19 1/8"-wide rough openings. Durable black powder coat finish. $39.99
This one-piece, carpeted plywood deck attaches and detaches instantly to your R2 Rock N Roller Cart to prevent small items from falling through the frame. Don't get stuck replacing your small gear items because they've slipped through the cracks. This carpeted deck will not only … $39.99
This one-piece, carpeted plywood deck attaches and detaches instantly to your R6 Rock N Roller Cart to prevent small items from falling through the frame. Don't get stuck replacing your small gear items because they've slipped through the cracks. This carpeted deck will not only … $44.99
This one-piece, carpeted plywood shelf features tube support beams and attaches and detaches instantly to the handles of your R2 Rock N Roller Cart. Create double the storage space for your gear as you transport it from the car to the venue and back. This carpeted shelf will not … $44.99
Supports up to 30 lbs. Ears attached to the rear frame allow the unit to be secured to the inside of ER or ERK series racks with wood screws. 12" sliders with nylon roller bearings provide smooth movement. Sliders feature a positive lockout for the black laminated wood shelf. She… $49.95
This rolling hand cart makes it easy to move your luggage or gear and, when not in use, folds down to a convenient 2" by 28" space-saving size. Made of lightweight, but sturdy polypropelene, the cart weighs less than 10 pounds, with ultra-durable nylon at the major plastic stress… $49.95
Rackmount your Summit 1/2 rack gear
The SRK-100 rack kit from Summit Audio allows you to mount one or 2 Summit 1/2 rack modules TD-100, 2BA-221, TLA-50 in a single rackspace.
$49.99
The RS-956 vertical add-on 10-space unit with American rack rail is constructed with solid heavy-gauge steel and arc welding. This add-on rack holds gear up to 18" deep securely and the open back allows for easy access to cables and connections. Features convenient hand rails for… $49.99
Don't get stuck replacing your small gear items because they've slipped through the cart cracks. This two-piece, carpet-covered plywood deck attaches and detaches instantly to your R8, R10, or R12 Rock N Roller Cart to prevent small items from falling through the frame. This carp… $49.99
This one-piece, carpeted plywood shelf features tube support beams and attaches and detaches instantly to the handles of your R6 Rock N Roller Cart. Create double the storage space for your gear as you transport it from the car to the venue and back. This carpeted shelf will not … $49.99
These easily installable powder-coated steel brackets turn the 1642-VLZ Pro into a 10-space rack-mounted mixer with space for cable pass-through and connections. $56.99
These easily installable powder-coated steel brackets turn the 1202-VLZ Pro into a rack-mounted mixer with space for cable pass-through and connections. $56.99
Solide et esthétique, cet accessoire est essentiel. Il permet le transport et l'utilisation en rack de votre console MULTIMIX12 USB ou Firewire.
- Paire d'adaptateurs pour montager en rack 19 pouces
- Fabrication en tole d'acier robuste
- Finition durable en peinture epoxy noi… €29.00 - Buy online
Bloc accumulateur pour MA-707 PAC et PACD.
12V/4 AH rechargeable.
Autonomie de 6 heures en continu pour 8 heures de charge
Livré à l'unité.
A utiliser par 2 sur l'enceinte amplifiée MIPRO MA707. €39.00 - Buy online
Ne faites plus qu'un tour pour transporter les accessoires de votre Lucas grâce à ce pack indispensable !
- 2 stands d'enceinte,
- 2 câbles speakon-speakon de 7 mètres
- 1 sac de transport en nylon résistant, avec poignées fonctionnelles
- Convient à tous les systèmes équip… €109.00 - Buy online
Kit de montage en rack pour tout modèle de la série Samson C.Class au format demi-rack.
Permet d'installer 1 ou 2 modèles simultanément.
Format rack 1U 19 pouces.
Livré avec visserie. €38.00 - Buy online
Rack mount one or two of the ½-rack Summit Audio products with the SRK-100.
The SRK-100 replaces the top panels of one or two TD-100's, 2BA-221's, TLA-50's, or FeQ-50's for sag-free, solid support to mount in a standard 19-inch rack. €39.00 - Buy online
Kit de montage en rack pour 1 ou 2 récepteurs Samson Stage 5, Stage 55, AirLine 77 and Concert 77. Une plaque est fournie pour masquer l'espace restant lorsqu'un seul récepteur est installé. €45.00 - Buy online
The bag solution for the DJ of the future. With the Record Media Trolley Superior, Reloop combines maximum manufacturing quality with an itelligent design in order to make all of a musician's equipment become trusty and mobile. Exceptionally strong: the duroplastic inlays which a… €79.00 - Buy online
The bag solution for the DJ of the future. With the Record Media Trolley Superior, Reloop combines maximum manufacturing quality with an itelligent design in order to make all of a musician's equipment become trusty and mobile. Exceptionally strong: the duroplastic inlays which a… €79.00 - Buy online
Piano
Orga,
Harpsichord
Accordion
Guitar
Bass
Viola
Mandolin
Violin
Harp
Violoncello
Banjo
Doublebass
Bassoon
Recorder
French horn
Euphonium
Flute
Clarinet
Harmonica
Saxophone
Trombone
Trumpet
Tuba
Oboe
Choir & Voice
Orchestra
Elec. Keyboard
Ukulele
Drums
Percussion
Marching / Fanfare
ACCESSORIES
STUDIO & MICS
LIVE SOUND
DJ & LIGHTING
ACCESSORIES - STUDIO/LIVE STORE 
Buy for USA/CANADA, click here
Buy for International, click here
Accessoires & Instruments 
General accessories
Sonorisation / Live sound
DJ Tools
