| Millenium : Tablet Holder 7" - 10,1"
- Suitable for almost all tablet computers from 7" to 10.1"- Mount on a (microphone) stand with 5/8" thread or tripod by means of tube clamp (10 - 25 mm, included)- Opening width 150 - 290 mm- Continuously (without fixed increments) rotatable and tiltable- All connections to the device remain freely...(+) - Suitable for almost all tablet computers from 7" to 10.1"- Mount on a (microphone) stand with 5/8" thread or tripod by means of tube clamp (10 - 25 mm, included)- Opening width 150 - 290 mm- Continuously (without fixed increments) rotatable and tiltable- All connections to the device remain freely accessible |
|
| marsch smart : Smartphone Holder Trumpet N
- For trumpet, flugelhorn and cornet- Clamping ring suitable for lead pipe diameters between 12.5 and 14.0 mm- Clamping range up to 95 mm mobile phone width- Swivels 360 degrees in horizontal direction- Swivels 85 degrees in vertical direction- Also suitable for live filming- Can be used in selfie m...(+) - For trumpet, flugelhorn and cornet- Clamping ring suitable for lead pipe diameters between 12.5 and 14.0 mm- Clamping range up to 95 mm mobile phone width- Swivels 360 degrees in horizontal direction- Swivels 85 degrees in vertical direction- Also suitable for live filming- Can be used in selfie mode for attachment control |
|
| Konig and Meyer : 23874 Tablet PC-Holder Bundle
(3 comments)
- Tablet sizes adjustable without tools- Adjustable mounting bracket with felt pad- Rotatable through 360°- Clamping range: 158 to 280 mm- Tablet size: 10" - 16"- Inclination: -90° to 85°- Load capacity: 8 kg- Continuous height adjustment on table clamp from 200 - 350 mm- Also suitable for tablet...(+) - Tablet sizes adjustable without tools- Adjustable mounting bracket with felt pad- Rotatable through 360°- Clamping range: 158 to 280 mm- Tablet size: 10" - 16"- Inclination: -90° to 85°- Load capacity: 8 kg- Continuous height adjustment on table clamp from 200 - 350 mm- Also suitable for tablets in case or protective sleeve- Overlapping clamping jaws with integrated rubber padding- Cable routing possible on the inside- Height adjustable by gas pressure spring- Material: bio-based plastic- Weight: 3.3 kg- Colour: Black |
|
| KandM : 19796
(27 comments)
- For attaching to tubes up to 30 mm in diameter- Can also be screwed onto any 3/8" thread- Rotatable by 90°- Infinitely adjustable (no fixed increments) to adapt to different tablet sizes without tools- Material: Plastic and steel- Width: 102 - 189 mm- Height: 163 - 242 mm- Depth: 5 - 11 mm- Weigh...(+) - For attaching to tubes up to 30 mm in diameter- Can also be screwed onto any 3/8" thread- Rotatable by 90°- Infinitely adjustable (no fixed increments) to adapt to different tablet sizes without tools- Material: Plastic and steel- Width: 102 - 189 mm- Height: 163 - 242 mm- Depth: 5 - 11 mm- Weight: 0.697 kg- Colour: Black |
|
| Millenium : iPad Holder
(288 comments)- iPad in the holder by 360° rotatable- For tripod support for pipe diameters between 14 - 20 mm- For mounting on a tripod- Suitable for iPad and iPad 2- Dimensions of the picture (W x L): 19 x 24-27.5 cm |
|
| Gravity : MA TH 01 B
- Infinitely adjustable clamping range from 150 to 295 mm- Suitable for tube diameters 15 - 35 mm due to solid mounting clamp- Exchangeable rings: 1 x 25 mm and 2 x 15 mm- Central locking of all joints by means of an adjusting screw- Material of arm: Steel- Material of tablet holder: Plastic- Weight...(+) - Infinitely adjustable clamping range from 150 to 295 mm- Suitable for tube diameters 15 - 35 mm due to solid mounting clamp- Exchangeable rings: 1 x 25 mm and 2 x 15 mm- Central locking of all joints by means of an adjusting screw- Material of arm: Steel- Material of tablet holder: Plastic- Weight: 0.662 kg- Colour: Black |
|
| Millenium : Tablet Holder 10,1" - 14"
(158 comments)- Suitable for almost all table computers from 10.1"- 14"- Mounting on (microphone) stand with 5/8" thread or pole mounting by means of included clamp (10 - 25 mm)- Opening width: 220 - 385 mm- Infinitely rotatable and tiltable- All connections to the device remain freely accessible |
|
| marsch smart : Smartphone Holder Trumpet
(5 comments)
- Enables the use of a smartphone as a marching book- Clamping ring suitable for mouth pipe diameters of 12.5 - 14.0 mm- Clamping range for smartphones up to 95 mm wide- Swivels 360 degrees in horizontal direction- Swivels 85 degrees in vertical direction- Also suitable for live filming- Can be used...(+) - Enables the use of a smartphone as a marching book- Clamping ring suitable for mouth pipe diameters of 12.5 - 14.0 mm- Clamping range for smartphones up to 95 mm wide- Swivels 360 degrees in horizontal direction- Swivels 85 degrees in vertical direction- Also suitable for live filming- Can be used in selfie mode for attachment control |
|
| Konig and Meyer : 19743 Biobased Tablet Holder
(15 comments)
- Suitable for tube diameters of up to 30 mm- Clamping range: 158 - 280 mm (narrow side) or 150-330 mm (wide side)- Inclination: 0° to 90°- Tablet size: Approximately 10" to 16"- For tablets with protective cover or case of up to 20 mm- Adjustable clamping brackets- Rotatable for portrait and land...(+) - Suitable for tube diameters of up to 30 mm- Clamping range: 158 - 280 mm (narrow side) or 150-330 mm (wide side)- Inclination: 0° to 90°- Tablet size: Approximately 10" to 16"- For tablets with protective cover or case of up to 20 mm- Adjustable clamping brackets- Rotatable for portrait and landscape format- Material: Steel, bio-based plastic (content of more than 50% and up to 100% renewable vegetable raw materials)- Weight: 0.75 kg- Colour: Black |
|
| Manfrotto : MCLAMP Smartphone Holder
- Suitable for any smartphone with a width up to 8.4cm- 1/4" inch thread at the base and at the back- Silicone plates for a secure hold- Holder is self-standing- Material: Technopolymer- Max. Load: 1 kg- Maximum height: 10.8 cm- Weight: 27 g- Colour: Black- Recommended accessories for Manfrotto MTPI...(+) - Suitable for any smartphone with a width up to 8.4cm- 1/4" inch thread at the base and at the back- Silicone plates for a secure hold- Holder is self-standing- Material: Technopolymer- Max. Load: 1 kg- Maximum height: 10.8 cm- Weight: 27 g- Colour: Black- Recommended accessories for Manfrotto MTPIXI-B Pixi Mini Tripod Bk: Art.453160 (not included) |
|
| Airturn : Manos Mount
(10 comments)- For devices up to 8.5" wide- Easy clipping of the tablet- Brackets with rubberised holding surfaces- 360 Degree rotatable- Snap action- Microphone tripod adapter- Measures: 33 x 17.8 x 7.6 cm- Weight: 0.47 kg |
|
| Triad-Orbit : iOrbit Universal Tablet Holder
(12 comments)
- With IO-C clamp- Clamping jaws supports widths from 6 to 27.5 cm- Stainless steel ball joint for 360 x 180° range of motion- IO-C clamp can be attached to tripods, table edges or parallel surfaces- Compatible with all other Triad Orbit components- Weight: iOrbit: 0.36 kg- Weight: IO-C: 0.17 kg- I...(+) - With IO-C clamp- Clamping jaws supports widths from 6 to 27.5 cm- Stainless steel ball joint for 360 x 180° range of motion- IO-C clamp can be attached to tripods, table edges or parallel surfaces- Compatible with all other Triad Orbit components- Weight: iOrbit: 0.36 kg- Weight: IO-C: 0.17 kg- Includes IO-H2 quick-change head for further IO-C applications |
|
| IK Multimedia : iKlip Xpand Mini
(62 comments)- Fits for smartphones in size from 3.5" to 6"- Rubberised "Gorilla Grip" for a secure hold without scratches- Width adjustable between 54 and 91 mm- Adapter for attachment to a microphone stand- Adjustable clamp for easy mounting on tripod tubes up to 30 mm- Weight: 180 g |
|
| Konig and Meyer : 19775 Biobased Tablet Holder
(29 comments)
- Clamping range: 158 - 280 mm (narrow side) or 150 - 330 mm (wide side)- Inclination: 0° to 90°- Tablet size: Approximately 10" to 16"- For tablets with protective cover or case up to 20 mm- Adjustable clamping brackets- Rotatable for portrait and landscape format- Material: Steel, bio-based plas...(+) - Clamping range: 158 - 280 mm (narrow side) or 150 - 330 mm (wide side)- Inclination: 0° to 90°- Tablet size: Approximately 10" to 16"- For tablets with protective cover or case up to 20 mm- Adjustable clamping brackets- Rotatable for portrait and landscape format- Material: Steel, bio-based plastic (content of more than 50% and up to 100% renewable vegetable raw materials)- Tripod height adjustable from 710 - 1560 mm- Weight: 1.8 kg- Colour: Black |
|
| Airturn : Manos Pivot Upgrade - Suitable for the Airturn Manos tablet holder- Spare part |
|
| KandM : 19791 Tablet PC-Holder
(456 comments)
- Tablet sizes adjustable without tools- Stepless adjustment of the tilt- Rotatable for landscape and portrait- Bracket for pipes up to 30 mm in diameter- Width of tablets: 128-232 mm- Height of the tablets: 222-334 mm- Strength of tablets: 6 to 11 mm- Weight: 0.6kg- Colour: Black- IPad- IPad Air- I...(+) - Tablet sizes adjustable without tools- Stepless adjustment of the tilt- Rotatable for landscape and portrait- Bracket for pipes up to 30 mm in diameter- Width of tablets: 128-232 mm- Height of the tablets: 222-334 mm- Strength of tablets: 6 to 11 mm- Weight: 0.6kg- Colour: Black- IPad- IPad Air- IPad Pro- Amazon Fire HDX 8.9- Samsung Galaxy Tab 9.7 from- Google Nexus 9- Asus Transformer- Microsoft Surface and Surface Pro |
|
| marsch smart : Smartphone Holder Saxophone
(5 comments)- Use the mobile phone as marching book- Also suitable for live filming- Can be used in selfie mode for embouchure control- Clamping range for smartphones up to 95 mm width- Swivels 360 degrees in horizontal direction- Swivels 85 degrees in vertical direction- Height adjustable by 30 mm |
|
| KandM : 19772 iPad Tripod
(167 comments)- Dual retractable tripod stand suitable for iPad 2, iPad 3 and iPad 4- Able to rotate for portrait and landscape mode- Easily secured- Height between 70 - 155 cm- Maximum weight load: 1.0 Kg- Plate: 252.1 x 195.4 mm- Weight: 1.65 kg- Colour: Black |
|
| KandM : 19798
(33 comments)- Rotatable by 90°- Tilt: 0° to 90°- Infinitely adjustable to different tablet sizes without tools- Material: Plastic and steel- Width: 102 - 189 mm- Height: 163 - 242 mm- Depth: 5 - 11 mm- Height tripod: 700 - 1.550 mm- Weight: 1.73 kg- Colour: Black |
|
| Roadworx : Tablet Clamp
(18 comments)- Extendable for tablets and smartphones from 6 - 27 cm- 2 x 1/4" Internal thread- Dimensions (L x W x D): 223 - 337 x 55 x 55 mm- Includes 1x 3/8" to 1/4" aluminium thread adapter |
|
My account (login)
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
