| Doepfer : A-151 (20 comments)Quad Sequential Switch Module- Electronic 4-position rotary switch - Trigger input - Reset input - 4 Inputs - 4 Outputs - Voltages of -8V to 8V can be processed - Euro rack format - Width 4 HP - Depth: 35 mm - Power consumption: 20 mA ( 12V)/ -10 mA (-12V) |
|
| Doepfer : A-162 (12 comments)Dual Trigger Delay- Allows delayed output of the input signal - Power requirement: 40 mA ( 12V) / -0 mA (-12V) - Width: 8 HP / 40.3 mm - Depth: 45 mm (measured from the back of the front panel) |
|
| Doepfer : A-160 Clock Divider (36 comments)
Clock Divider Module- Frequency divider for digital clock signals - 6 Outputs (input frequency / 2 - input frequency / 64) - LED indicator for each output - Eurorack format - Width: 4 HP - Depth: 40 mm - Power requirements: 40 mA ( 12V) / -0 mA (-12V) - Optional expander module: Article number 1866...(+) Clock Divider Module- Frequency divider for digital clock signals - 6 Outputs (input frequency / 2 - input frequency / 64) - LED indicator for each output - Eurorack format - Width: 4 HP - Depth: 40 mm - Power requirements: 40 mA ( 12V) / -0 mA (-12V) - Optional expander module: Article number 186684 (not included) |
|
| Doepfer : A-163 (3 comments)Audio Frequency Divider Module- Voltage controlled - Frequency of the input signal (audio) is divided by integer factor - Eurorack format - Width: 8 HP - Depth: 45 mm - Power requirement: 40mA ( 12V) / -10mA (-12V) |
|
| ADDAC : 217 Quad Gate to Trigger ADDAC 217 Quad Gate to Trigger; Eurorack module; 4 independent channels for triggering drum-modules or envelopes; each channel converts an incoming gate-signal to a 1ms-trigger; bypass switch per channel; power consumption: 10mA (+12V) / 10mA (-12V); width: 3 HP; depth: 25mm |
|
| Behringer : 961 Interface
Behringer 961 Interface; Eurorack module; Multi-channel Trigger Converter; dual S-Trigger to V-Trigger converter (2 outputs); Audio to V-Trigger converter with adjustable sensitivity; dual multichannel V-Trigger to S-Trigger converter (2x 6 inputs); separate controls for setting length of S-Trigger ...(+) Behringer 961 Interface; Eurorack module; Multi-channel Trigger Converter; dual S-Trigger to V-Trigger converter (2 outputs); Audio to V-Trigger converter with adjustable sensitivity; dual multichannel V-Trigger to S-Trigger converter (2x 6 inputs); separate controls for setting length of S-Trigger out per V-Trigger input group B; width: 21 HP |
|
| Doepfer : A-160-5 VC Clock Multiplier (9 comments)Voltage Controlled Clock Multiplier- Multiplication factor can be controlled by control voltage or a regulator - Width: 4 HP - Depth: 35 mm - Power requirements: 50 mA ( 12 V) / -0 mA (-12 V) |
|
| Doepfer : A-160-2 Clock Divider II (14 comments)Frequency divider- For clock/trigger/gate signals - Width: 4 TE/ 4 HP / 20 mm |
|
| Mutable Instruments : Branches (7 comments)Dual Bernoulli Gate- Output: 5 V HIGH level - Open source hardware and firmware - Width: 6 HP - Depth: 25 mm - Power requirements: 10 mA ( 12 V) / -1 mA (-12 V) |
|
| Doepfer : A-160-5 Vintage Edition (5 comments)Voltage Controlled Clock Multiplier- Multiplication factor can be controlled by control voltage or a regulator - Black front panel - Width: 4 HP - Depth: 35 mm - Power requirements: 50 mA ( 12 V) / -0 mA (-12 V) |
|
| Erica Synths : Pico Trigger (2 comments)
Master Clock Module- Four different trigger patterns (up to 16 steps long) - Adjustable shuffle - Clock-divider and polyrhythmic pattern - New patterns can be loaded via the clock input - Four trigger outputs - Module can be clocked to external clock or even output clock signals (Clock IN / OUT) - W...(+) Master Clock Module- Four different trigger patterns (up to 16 steps long) - Adjustable shuffle - Clock-divider and polyrhythmic pattern - New patterns can be loaded via the clock input - Four trigger outputs - Module can be clocked to external clock or even output clock signals (Clock IN / OUT) - Width: 3 TE / HP - Depth: 35 mm - Power requirement: 20 mA ( 12 V) / -5 mA (-12 V) |
|
| Erica Synths : Midi to Trigger Module (1 comments)
MIDI to Trigger Module- Converts MIDI notes into trigger signals - 8 Trigger outputs - LED display of the active triggers - Easy assignment of MIDI notes to triggers - Configurable MIDI channel - Switchable MIDI clock output - Power consumption: 15mA @ 12V, 0mA @ -12V - Dimensions (W x D): 6 HP x ...(+) MIDI to Trigger Module- Converts MIDI notes into trigger signals - 8 Trigger outputs - LED display of the active triggers - Easy assignment of MIDI notes to triggers - Configurable MIDI channel - Switchable MIDI clock output - Power consumption: 15mA @ 12V, 0mA @ -12V - Dimensions (W x D): 6 HP x 25 mm |
|
| Befaco : Burst
Befaco Burst; Eurorack module; voltage controllable burst generator; creates a sequence of up to 64 trigger pulses with programmable quantity, distribution, probability and multiplication / division; all parameters are controllable via CV; switchable burst cycle mode; tap tempo; inputs for Trigger a...(+) Befaco Burst; Eurorack module; voltage controllable burst generator; creates a sequence of up to 64 trigger pulses with programmable quantity, distribution, probability and multiplication / division; all parameters are controllable via CV; switchable burst cycle mode; tap tempo; inputs for Trigger an Ping; outputs for tempo, EOC and bursts; power consumption: 50mA ( 12V) / 10mA (-12V); width: 8 HP; depth: 30 mm |
|
| Erica Synths : Black VC Clock V2 VC Clock Module- Manual and CV adjustable BPM - External clock input - 3-Digit BPM display - Manually operable and programmable sequencer reset output - Power consumption: 40mA @ 12V, 5mA @ -12V - Dimensions (W x D): 10 HP / 25 mm |
|
| Malekko : Quad Gate Delay
Malekko Quad Gate Delay; Eurorack Module; 4 channel rhythm generator and logic module; 4 inputs for trigger and gate signals which can be delayed individually; manual delay control per channel; 3 modes: induvidual channel delay, triggering of all channels via input 1, chaining of all channels in ser...(+) Malekko Quad Gate Delay; Eurorack Module; 4 channel rhythm generator and logic module; 4 inputs for trigger and gate signals which can be delayed individually; manual delay control per channel; 3 modes: induvidual channel delay, triggering of all channels via input 1, chaining of all channels in series; 3 time modes: adjustable delay up to 1 second; tempo synced to incoming clock signal (unquantized), tempo synced to incoming clock signal (quantized); input / output per channel; Mix output; CV inputs for Delay 1 and 2; power consumtion: 100 mA ( 12 V) / 20 mA (-12 V); width: 8 HP; depth: 23 mm |
|
| Make Noise : TEMPI (2 comments)
Eurorack Module- Polyphonic 6-channel clock module - Replica of the most classic Clock Divider and multiplier arrangements by HUMAN and / or programming MACHINE - Up to 64 settings can be stored and retrieved by control signals from your system or the Select Bus - 6 Simultaneously programmable and p...(+) Eurorack Module- Polyphonic 6-channel clock module - Replica of the most classic Clock Divider and multiplier arrangements by HUMAN and / or programming MACHINE - Up to 64 settings can be stored and retrieved by control signals from your system or the Select Bus - 6 Simultaneously programmable and patchable clocks - Clock MOD allows channel switching or RUN / STOP function - The tempo input "remembers" the last stored tempo - Current consumption: 46mA @ 12V, 0mA @ -12V - Dimensions (W x D): 10 hp x 24 mm |
|