| Fredenstein : U1631
(1 comments)- Analogue 16-channel LED display- Very high resolution with 31 LEDs per channel- 60 dB display range per channel- Connection via Sub-D25 (2x input, 2x output)- Power consumption: max. 25 watts- Integrated power supply unit- Format: 19" / 2 U |
|
| Fredenstein : U70F - DSP based- Simultaneous RMS indication- Dual Range: -39 to +20 dB in 1 dB resolution or -19.5 dB to +10 dB at 0.5 dB resolution- Switchable Peak Hold function- 2 Balanced XLR inputs and outputs- Integrated power supply- Desktop or rack- Design: 19"/ 1U |
|
| Fredenstein : Bento 6DS
(2 comments)
- With LCD colour display for exact representation of the set parameters, current consumption, output voltage as well as the temperature- Internal power supply +/- 16 V / +48 V- Reduced cabling requirements, since the audiorouting can be programmed from card to card on the display- Intelligent volta...(+) - With LCD colour display for exact representation of the set parameters, current consumption, output voltage as well as the temperature- Internal power supply +/- 16 V / +48 V- Reduced cabling requirements, since the audiorouting can be programmed from card to card on the display- Intelligent voltage distribution- Energy efficient- Extremely low noise integrated 3 A power supply- Suitable 19 " rack kit: Art. 341739 (not included) |
|
| Fredenstein : Bento 8 Pure Analog
(13 comments)- With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Compressor link and ground lift switch- Intelligent voltage distribution- Energy efficient- Design: 19" / 3U |
|
| Fredenstein : Bento 2 - Audio routing and link function can be set on the back panel- Balanced XLR and jack inputs and outputs per slot- Internal power supply: 90 V AC - 240 V AC, 50-60 Hz,+/- 16Volt (+/- 900mA) and +48V (35mA)- On/off switch in front and back- Design: 19"/ 1U |
|
| Fredenstein : Bento 6SB
(4 comments)- Internal power supply +/-16 V / +48 V- Reduced cabling, as the audio routing can be switched from card to card on the rear panel- Intelligent voltage distribution- Energy efficient- Extremely low-noise integrated power supply- Colour: Black- Suitable 19" rack kit: Article Nr. 341739 (not included) |
|
| Fredenstein : Blank Panel Black
(22 comments)- For 500 Series module frames- Colour: Black |
|
| Fredenstein : Artistic EQ
(4 comments)
- With Colour function for tube-like sound- Discrete operational amplifier OPA2- Gain control from -14 dB to +14 dB- Low frequencies steplessly adjustable from 30 to 300 Hz- Middle frequencies steplessly adjustable from 300 to 3,000 Hz- High frequencies steplessly adjustable from 2,000 to 20,000 Hz-...(+) - With Colour function for tube-like sound- Discrete operational amplifier OPA2- Gain control from -14 dB to +14 dB- Low frequencies steplessly adjustable from 30 to 300 Hz- Middle frequencies steplessly adjustable from 300 to 3,000 Hz- High frequencies steplessly adjustable from 2,000 to 20,000 Hz- Shelf and bell function- LED Display for output peak level (+20 dB)- LED Display for output level (>-30 dB)- Bypass switch- Design: 500 Series module |
|
| Fredenstein : Bento 6S
(60 comments)- Internal power supply +/- 16 V/ +48 V- Reduced cabling, so that the audio routing may be switched from card to card on the rear panel- Intelligent power distribution- Energy efficient- Low-noise integrated power supply- Matching 19" rack kit available under Article Nr 341739 (not included) |
|
| Fredenstein : V.A.S. Comp
(15 comments)
- Fully discrete OPA2 operational amplifier- American output transformer- 2x 12-Digit LED display for level reduction and output level- Adjustable release time from 70 milliseconds up to 2.5 seconds- Adjustable attack time of 0.5 milliseconds up to 50 milliseconds- Adjustable ratio from 2:1 to 20:1-...(+) - Fully discrete OPA2 operational amplifier- American output transformer- 2x 12-Digit LED display for level reduction and output level- Adjustable release time from 70 milliseconds up to 2.5 seconds- Adjustable attack time of 0.5 milliseconds up to 50 milliseconds- Adjustable ratio from 2:1 to 20:1- Switchable side chain filter, adjustable from 6 Hz to 2 KHz- Mixable uncompressed and compressed signals- Line input: XLR and jack 6.3 mm- Line Out: XLR and 6.3 mm jack- Link input: 6.3 mm jack- Integrated power supply- Power switch on the rear side- Desktop format- Design: 9.5"/ 1U |
|
| Fredenstein : F200
(2 comments)
- FET based- Usable as preamp, compressor or preamp + compressor- Class A microphone amplifier- Max. +60 dB- Phase reverse switch- 20 dB pad switch- 60 Hz switchable low-cut- + 48V phantom power switchable- High-impedance instrument input- FET compressor- Attack time adjustable: 0.2 - 50 ms- Release...(+) - FET based- Usable as preamp, compressor or preamp + compressor- Class A microphone amplifier- Max. +60 dB- Phase reverse switch- 20 dB pad switch- 60 Hz switchable low-cut- + 48V phantom power switchable- High-impedance instrument input- FET compressor- Attack time adjustable: 0.2 - 50 ms- Release time adjustable: 70 ms - 2.4 s- Compression ratio: 2: 1 to 20: 1- Frequency response: 20 Hz - 20 kHz (+/- 0.5dB)- Stereo Link- VU meter (switchable output level or gain reduction)- XLR inputs and outputs- Built-in power supply- Format: 19 "/ 1U |
|
| Fredenstein : Bento 8 Pro Pure Analog
(3 comments)
- With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Compressor link and ground lift switch- Intelligent voltage distribution- Energy efficient- Integrated monitoring section with headp...(+) - With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Compressor link and ground lift switch- Intelligent voltage distribution- Energy efficient- Integrated monitoring section with headphone amplifier as well as 2x VU meters to control the individual channels- Design: 19" / 3U |
|
| Fredenstein : Bento 10S
(25 comments)- For Fredenstein Series 500 modules- Internal 90- 240 V AC power supply with +/- 16 V /+48 V- Built-in audio routing: modules can be daisy-chained via switches on the back panel- Intelligent voltage distribution- Energy efficient- Extremely low noise integrated power supply- Incl. 19" rackmount |
|
| Fredenstein : Bento 10SB
- 19" Rack for API 500 system modules- Internal 90-240 V (AC) power supply with +/- 16Volt/+48Volt- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Intelligent voltage distribution- Energy efficient- Extremely low-noise integrated power supply unit-...(+) - 19" Rack for API 500 system modules- Internal 90-240 V (AC) power supply with +/- 16Volt/+48Volt- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Intelligent voltage distribution- Energy efficient- Extremely low-noise integrated power supply unit- Colour: Black- Includes 19" rack kit |
|
| Fredenstein : Artistic Mic Pre Plus
(1 comments)
- 500 Series module- Discrete operational amplifier OPA2- High impedance 2 MOhm instrument input- Switchable input impedance from 1500 Ohm to 300 Ohm- Switchable 48V phantom power- -20dB Pad- Colour function can be added to the original signal- Gain control GAIN from 20dB to 65 dB- LED Display for o...(+) - 500 Series module- Discrete operational amplifier OPA2- High impedance 2 MOhm instrument input- Switchable input impedance from 1500 Ohm to 300 Ohm- Switchable 48V phantom power- -20dB Pad- Colour function can be added to the original signal- Gain control GAIN from 20dB to 65 dB- LED Display for output peak level (+20 dB) and signal- LED Display for output level (>-30 dB)- LED Display for colour function- POL switch to invert the phase- Design: 500 Series module |
|
| Fredenstein : V.A.S. MicPre
(39 comments)
- Characterful vintage sound- Discretely constructed OPA2 operational amplifier- American output transformer- +48 V Phantom power- Switchable phase reversal- -20 dB pad- Low Cut- Switchable input impedance, 1500 ohm to 300 ohm (LZ)- LED meter- XLR microphone input- Hi-Z instrument input for guitar /...(+) - Characterful vintage sound- Discretely constructed OPA2 operational amplifier- American output transformer- +48 V Phantom power- Switchable phase reversal- -20 dB pad- Low Cut- Switchable input impedance, 1500 ohm to 300 ohm (LZ)- LED meter- XLR microphone input- Hi-Z instrument input for guitar / bass on the front side- Line output: 6.3 mm XLR and jack- Insert: 6.3 mm jack- Headphone: 6.3 mm jack- Integrated power supply- Power switch on the back- Desktop format- Design: 9.5" / 1U |
|
| Fredenstein : Artistic Comp Plus
(5 comments)
- Fully discrete built-in OPA2 operational amplifier- American output transformer- Made completely using SMT technology- Adjustable release time from 70 milliseconds up to 2.5 seconds- Adjustable attack times from 0.5, 5, and 25 milliseconds- Adjustable ratio from 2:1 to 20:1- SC Filter selects the ...(+) - Fully discrete built-in OPA2 operational amplifier- American output transformer- Made completely using SMT technology- Adjustable release time from 70 milliseconds up to 2.5 seconds- Adjustable attack times from 0.5, 5, and 25 milliseconds- Adjustable ratio from 2:1 to 20:1- SC Filter selects the low-cut filter in the side-chain from 150 or 300 Hz- Output mixer between the compressed and uncompressed signals- 12-Digit LED display- External side-chain option (possible only with additional AUX inputs from the Bento series)- Design: 500 module |
|
| Fredenstein : F609 Mic Preamp
(2 comments)
- Two double triode tubes (ECC802S and ECC803S)- American input and output transformers- DI input 6.3 mm jack 500 kOhm- + 48V phantom power can be switched- High pass filter switchable 50 Hz or 100 Hz- -20 dB Pad switchable- Max. Input Level: +12 dBu- Max. Output Level: + 26 dBu- Illuminated VU disp...(+) - Two double triode tubes (ECC802S and ECC803S)- American input and output transformers- DI input 6.3 mm jack 500 kOhm- + 48V phantom power can be switched- High pass filter switchable 50 Hz or 100 Hz- -20 dB Pad switchable- Max. Input Level: +12 dBu- Max. Output Level: + 26 dBu- Illuminated VU display- Clip LED- Construction: 500 module |
|
| Fredenstein : Rack-Kit Bento 6
(30 comments)- Fred Stone Bento 6 |
|
| Fredenstein : Artistic Leveler
(2 comments)
- With "Multi Channel Link" function- External sidechain input via the AUX input socket when using a Bento6 / 10 500 rack- Discrete operational amplifier OPA2 (changeable)- Reverse Mancini circuit- Input gain knob, ratio, release- Output level and wet / dry mix function- Attack adjustable (12, 25 an...(+) - With "Multi Channel Link" function- External sidechain input via the AUX input socket when using a Bento6 / 10 500 rack- Discrete operational amplifier OPA2 (changeable)- Reverse Mancini circuit- Input gain knob, ratio, release- Output level and wet / dry mix function- Attack adjustable (12, 25 and 50 ms)- Adjustable ratio from 1.5: 1 to 7.5: 1- Switchable side-chain filters of 150 or 300 Hz- 16-Digit LED display for level reduction- Clip LED- Cascadable with second Artistic Leveler- Bypass switch- Type: 500 module |
|
My account (login)
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
