| Presonus : PRM1
(47 comments)- With 1/4" ball capsule- Designed to use with Virtual StudioLive (VSL) or Smaart Analyzer Technology included- Frequency range: 20 Hz to 20 kHz- Sensitivity: -37 dB / PA- SPL: 132 dB- Incl. Microphone clamp, foam windscreen and hard case |
|
| beyerdynamic : MM 1 (2023)
(104 comments)
- beyerdynamic MM 1 (2023) - condenser measuring microphone for calibrating sound systems and measuring sound levels and frequency curves, characteristic: omnidirectional, frequency response: 20 - 20000 Hz (50 - 16000 Hz - 1.5 dB), max. SPL: 122 dB, 15 mV/Pa, 12-48V phantom power, current consumpti...(+) - beyerdynamic MM 1 (2023) - condenser measuring microphone for calibrating sound systems and measuring sound levels and frequency curves, characteristic: omnidirectional, frequency response: 20 - 20000 Hz (50 - 16000 Hz - 1.5 dB), max. SPL: 122 dB, 15 mV/Pa, 12-48V phantom power, current consumption approx. 3.4 mA, dimensions: 133 x 19/9 mm, capsule diameter 9 mm, weight: 73 g, incl. bag, holder and measuring diagram |
|
| NTI Audio : M2211
(1 comments)- Class 2- Class 1 frequency response- Frequency range: 5 - 20,000 Hz- Omnidirectional- Max. SPL 144 dB- Impedance 100 Ohm, balanced- 48 VDC phantom power- Removable capsule- Metal diaphragm- Length: 150 mm- Diameter: 20.5 mm |
|
| NTI Audio : M4261 - For XL2 systems- Class 2- Frequency range: 20 - 20,000 Hz- Polar pattern: Omnidirectional- Max. SPL: 146 dB- Impedance: 100 Ohm balanced- Phantom power: 48 V DC- Length: 150 mm- Diameter: 20.5 mm |
|
| Audix : TM-1 - |
|
| IK Multimedia : MEMS Microphone for ARC System
- Omnidirectional- Free field- Calibrated frequency response when used with ARC: 20-20,000 Hz +/- 0.5 dB- Transformerless output- Electronically balanced- Impedance: 100 Ohm- Signal-to-noise ratio: 65 dB (A)- Maximum sound pressure level: 124 dBSPL- Phantom power: 12 - 48 V- Dimensions: 129.5 mm x 2...(+) - Omnidirectional- Free field- Calibrated frequency response when used with ARC: 20-20,000 Hz +/- 0.5 dB- Transformerless output- Electronically balanced- Impedance: 100 Ohm- Signal-to-noise ratio: 65 dB (A)- Maximum sound pressure level: 124 dBSPL- Phantom power: 12 - 48 V- Dimensions: 129.5 mm x 23 mm- Weight: 25 g- Scope of delivery: measurement microphone and microphone clamp |
|
| Earthworks Audio : M30
(4 comments)- Omnidirectional pattern- Frequency range: 5Hz - 30 kHz- +-1/-3 dB- Max. SPL: 142 dB- 48V Phantom power required |
|
| Audix : TM-1 Plus
(12 comments)
- Pre-polarised 6mm condenser capsule- Omnidirectional- Transmission 20 Hz - 25 kHz (+/- 2 dB)- Max SPL 140 dB- For 18-52 V phantom power- Output impedance 200 Ohm- Dynamic range 112 dB- Suitable for real time analyser, measurements, tests, room analysis software programs, ambient/room recording- Ho...(+) - Pre-polarised 6mm condenser capsule- Omnidirectional- Transmission 20 Hz - 25 kHz (+/- 2 dB)- Max SPL 140 dB- For 18-52 V phantom power- Output impedance 200 Ohm- Dynamic range 112 dB- Suitable for real time analyser, measurements, tests, room analysis software programs, ambient/room recording- Housing made of precision machined nickel-plated brass housing- Gold-plated XLR plug connector- Length approx. 150 mm- Elastic suspension (SMT-19)- 1/2" Adapter for calibrator (TM1-CA) and individual sensitivity/calibration data file on USB stick- Optional screw-on windshield (WS-TM1) |
|
| Sonarworks : SoundID Ref Spk and HP w Mic EDU
- Frequency response correction for studio monitors and headphones for the most linear reproduction possible- Enables better assessment of recordings and mixes- Room analysis and automatic room size calculation using numerous measuring points- Audio Calibration Engine for the most accurate adjustmen...(+) - Frequency response correction for studio monitors and headphones for the most linear reproduction possible- Enables better assessment of recordings and mixes- Room analysis and automatic room size calculation using numerous measuring points- Audio Calibration Engine for the most accurate adjustment possible- Any number of profiles for loudspeakers can be stored- Comes with calibration curves for over 280 different headphone models- Target curves can be individually adjusted in real time- Translation Check simulates more than 20 different devices and device types for the accurate realisation of a mix- Three selectable filter modes: Zero Latency, Mixed and Linear Phase to optimise filter quality and latency for different listening situations- Additional settings for mono, dry/wet and safe headroom- Only available in the app: MIDI mapping for various parameters and user presets for predefined output configurations- Measurement microphone with pre-polarised electret condenser capsule- Frequency range: 20 - 20.000 Hz with measurement protocol- Polar pattern: Omnidirectional- Sensitivity: 14mV / Pa- Inherent noise: 24 dB- Signal-to-noise ratio: 70 dB- Dynamic range: 106dB- Maximum sound pressure level: 132 dB SPL- Requires 48V phantom power- Connection: XLR 3-pole- Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software- Calibration file for 0° on-axis measurements in TXT format |
|
| Earthworks Audio : M23
(9 comments)
- Directional characteristic: omnidirectional- Frequency range: 3 Hz to 23 kHz + -1/-3 dB- Sensitivity: 30 mV/Pa- Amplifier type: Discrete Class-A- Max. SPL (sound pressure level): 140 dB- Requires 48 V phantom power- Dimensions: 165 x 22 mm- Weight: 160g- Includes a microphone clamp and adapter fro...(+) - Directional characteristic: omnidirectional- Frequency range: 3 Hz to 23 kHz + -1/-3 dB- Sensitivity: 30 mV/Pa- Amplifier type: Discrete Class-A- Max. SPL (sound pressure level): 140 dB- Requires 48 V phantom power- Dimensions: 165 x 22 mm- Weight: 160g- Includes a microphone clamp and adapter from 5/8" to 3/8" |
|
| Behringer : ECM8000
(955 comments)
- Precise electret condenser measurement microphone- Ultra linear frequency range for high measurement precision- Balanced omnidirectional polar pattern- Operatable with phantom power from +15 V to + 48 V- Rugged construction in slim, modern design- Low inherent noise XLR output with gold- plated co...(+) - Precise electret condenser measurement microphone- Ultra linear frequency range for high measurement precision- Balanced omnidirectional polar pattern- Operatable with phantom power from +15 V to + 48 V- Rugged construction in slim, modern design- Low inherent noise XLR output with gold- plated contacts- Incl. storage box |
|
| Sonarworks : SoundID Ref Measurement Micro
(49 comments)
- Pre-polarised electret condenser capsule- Frequency range: 20 - 20,000 Hz with measurement protocol- Polar pattern: omnidirectional- Sensitivity: 14mV / Pa- Inherent noise: 24 dB- Signal-to-noise ratio: 70 dB- Dynamic range: 106dB- Max. sound pressure level: 132 dB- Requires 48 V phantom power- Co...(+) - Pre-polarised electret condenser capsule- Frequency range: 20 - 20,000 Hz with measurement protocol- Polar pattern: omnidirectional- Sensitivity: 14mV / Pa- Inherent noise: 24 dB- Signal-to-noise ratio: 70 dB- Dynamic range: 106dB- Max. sound pressure level: 132 dB- Requires 48 V phantom power- Connection: XLR 3-pin- Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software- Calibration file for 0° on-axis measurements in TXT format- 21-Day trial version of Sonarworks SoundID Reference available online |
|
| Earthworks Audio : M23R
(5 comments)
- Directional characteristic: Omnidirectional- Frequency range: 3 Hz - 23 kHz (+/- 0.5 dB)- Sensitivity: 36 mV/Pa (-28.9 dBV/Pa)- SPL (sound pressure level): 140 dB- Equivalent noise level: 20 dB SPL (A weighted)- Requires 24 - 48 V phantom power, 10 mA- Connection: XLR- Dimensions (length x diamete...(+) - Directional characteristic: Omnidirectional- Frequency range: 3 Hz - 23 kHz (+/- 0.5 dB)- Sensitivity: 36 mV/Pa (-28.9 dBV/Pa)- SPL (sound pressure level): 140 dB- Equivalent noise level: 20 dB SPL (A weighted)- Requires 24 - 48 V phantom power, 10 mA- Connection: XLR- Dimensions (length x diameter): 165 x 22 mm- Weight: 0.16 kg |
|
| Earthworks Audio : M50 - Polar pattern: Omnidirectional- Frequency response: 3 - 50,000 Hz- Max. SPL: 140 dB- Requires a +48 V phantom power- Dimensions (length x diameter): 229 x 22 mm- Weight: 225 g- Incl. MC1 microphone clip and ADP1 measurement adapter |
|
| Superlux : ECM 888 B
(31 comments)
- Frequency range: 20 - 20,000 Hz- Sensitivity at 1,000 Hz: 43dBV / Pa (7.1mV / Pa) ± 3dB- Impedance: 800 Ohm- 94 dB SPL- 128 dB max- Equivalent SPL: 22dB- Signal to noise ratio: 72 dB- Operates with 4LR44 6V batteries- Weight: 150 g- Dimensions: 210 x 170 mm- Nickel housing- Incl. battery and shoc...(+) - Frequency range: 20 - 20,000 Hz- Sensitivity at 1,000 Hz: 43dBV / Pa (7.1mV / Pa) ± 3dB- Impedance: 800 Ohm- 94 dB SPL- 128 dB max- Equivalent SPL: 22dB- Signal to noise ratio: 72 dB- Operates with 4LR44 6V batteries- Weight: 150 g- Dimensions: 210 x 170 mm- Nickel housing- Incl. battery and shock mount holder |
|
| Sonarworks : SoundID Ref Spk and HP w Mic
(105 comments)
- Speaker and headphone calibration software and measurement microphone in a bundle- Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones- Enables a more precise evaluation of recordings and mixes- Room analysis and automated calculation of the...(+) - Speaker and headphone calibration software and measurement microphone in a bundle- Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones- Enables a more precise evaluation of recordings and mixes- Room analysis and automated calculation of the room size based on several measurements- Audio calibration engine allows for accurate processing- Save an unlimited number of calibration profiles for monitor speakers- Comes with headphone calibration profiles for more than 280 supported models- Target curve custom adjustments in real time- Translation check simulates over 20 different devices and device types for accurate mix translation results- 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation- Additional processing controls for Mono, Dry/Wet and Safe Headroom- App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations- Measurement microphone with a pre-polarized electret-condenser capsule- Frequency response: 20 - 20.000 Hz with calibration curve- Omnidirectional polar pattern- Sensitivity: 14 mV/Pa- Self noise: 24 dB- Signal to noise ratio: 70 dB- Dynamic range: 106dB- Maximum sound pressure level: 132 dB SPL- Requires 48 V phantom power- Connector: 3 pin XLR- Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference- Microphone calibration file for 0° on-axis measurements in .txt format |
|
| Superlux : ECM999
- Also suitable for recordings and room sound analysis systems- Directivity: Omnidirectional- Frequency range: 20 - 20,000 Hz- 3-Pin male XLR connector- Phantom power- Noise ratio: 70 dB- Equivalent noise level: 22 dB- Peak SPL: 132 dB- Diameter: 21 mm- Weight: 0.15 kg- Colour: Black- Clip and winds...(+) - Also suitable for recordings and room sound analysis systems- Directivity: Omnidirectional- Frequency range: 20 - 20,000 Hz- 3-Pin male XLR connector- Phantom power- Noise ratio: 70 dB- Equivalent noise level: 22 dB- Peak SPL: 132 dB- Diameter: 21 mm- Weight: 0.15 kg- Colour: Black- Clip and windscreen included |
|
| Haun : MBNM 550 EL - Polar pattern: Omnidirectional- Frequency range: 10 - 20,000 Hz- SPL: 126 dB max.- Impedance: 500 Ohm- 16-48 Volt phantom power required- XLR connector- Almost linear frequency response- Dimensions: 21 x 190 mm- Also suitable for recording piano and acoustic instruments- Incl. wooden case |
|
| DBX : DriveRack RTA-M
(155 comments)- For Driverack and other measuring applications- Ball, electret capsule- Frequency range: 20 - 20,000 Hz- Impedance: 250 Ohm- Sensitivity: -63 dB + 3 dB (0 dB = 1V / microbar 1,000 Hz)- 9-52 V phantom power required- Incl. microphone mount and case |
|
| NTI Audio : Mini SPL with Certificate - With omnidirectional characteristics according to IEC 60651- Type II- For ML1- Calibrated- Battery power- For acoustic and sound level measurements- Incl. Micro-clamp and certificate, case |
|
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
