| Clearsonic : Gloves
(9 comments)Fabric Gloves- For the gentle handling of Clearsonic panels |
|
| the t.akustik : HiLo-N25
Dimpled Foam Absorber- Material: HiLo-F Acoustic foam made of polyurethane with high stiffness and low density - Dimple height: 15 mm - Total height: 25 mm - Bulk density 16.5 ± 1.0 kg / m³ - Compressive hardness at 40% deformation 4.0 ± 0.7 kPa - Tensile strength min. 100 kPa - Breaking elongation ...(+) Dimpled Foam Absorber- Material: HiLo-F Acoustic foam made of polyurethane with high stiffness and low density - Dimple height: 15 mm - Total height: 25 mm - Bulk density 16.5 ± 1.0 kg / m³ - Compressive hardness at 40% deformation 4.0 ± 0.7 kPa - Tensile strength min. 100 kPa - Breaking elongation min. 80% - Flame retardant according to MVSS 302 (firing rate |
|
| Auralex Acoustics : U-Boat Floor Floaters
(11 comments)
U-Shaped Carrier Element- Made of rubber for insulation and sound decoupling for frame constructions of physical structures - Achieves significantly reduced sound transmission characteristics and improved bass frequency definition - Thickness: sides 8 mm - Base area: 12 mm - Suitable for 38 mm thick...(+) U-Shaped Carrier Element- Made of rubber for insulation and sound decoupling for frame constructions of physical structures - Achieves significantly reduced sound transmission characteristics and improved bass frequency definition - Thickness: sides 8 mm - Base area: 12 mm - Suitable for 38 mm thickness (beams, slats, etc.) - Measurements (WxHxL): 54 x 38 x 50 mm |
|
| the t.akustik : Multi Pads
(72 comments)Flat Monitor Pad Set- Universal use - Self-adhesive - Anti-slip material (cell rubber EPDM 60) - Rounded edges - Possible areas of application: under Monitor speakers, 19 "- or hi-fi equipment, table Cases and more. - Dimensions per pad: 70 x 70 x 15 mm - Colour: Black - Set includes 4 pads |
|
| the t.akustik : HiLo-N40
(1541 comments)
Convoluted Foam Absorber- Material: HiLo-F acoustic foam from polyurethane with high stiffness and low density - Stud height: 30 mm - Total height: 40 mm - Bulk Density: 16,5 ± 1,0 kg / m³ - Compression load at 40%, deformation 4.0 ± 0.7 kPa - Tensile strength min 100 kPa - Elongation min 80 % - Fla...(+) Convoluted Foam Absorber- Material: HiLo-F acoustic foam from polyurethane with high stiffness and low density - Stud height: 30 mm - Total height: 40 mm - Bulk Density: 16,5 ± 1,0 kg / m³ - Compression load at 40%, deformation 4.0 ± 0.7 kPa - Tensile strength min 100 kPa - Elongation min 80 % - Flame retardant according to MVSS 302 < 100 mm/min - Dimensions: 1000 x 500 x 40 mm - Price per piece - Suggested fixing method: Acoustic adhesive Article Nr. 177265 |
|
| the t.akustik : Akustik-Kleber Liquid
the t.akustik Contact Glue Liquid; Dispersion clue for acoustic elements such as foam and Basotect; reduced slipping and extended open time D1 TE according to EN 12004:2017; solvent-free; ready to use, pasty; fire class E at layer thickness < 5 mm on substrates of class D-s2, d0 with a density > 680...(+) the t.akustik Contact Glue Liquid; Dispersion clue for acoustic elements such as foam and Basotect; reduced slipping and extended open time D1 TE according to EN 12004:2017; solvent-free; ready to use, pasty; fire class E at layer thickness < 5 mm on substrates of class D-s2, d0 with a density > 680 kg/m³; high initial adhesion; fast strength development; 310ml cartridge; Application temperature > 5°C; storing: cool but frost-free, at below 30°C, protected from direct sunlight; compatible Caulking Gun: #417630 |
|
| the t.akustik : Contact Glue
(1372 comments)
Acoustic Adhesive- For acoustic convoluted, pyramids and basotect - Solvent-free - Elastoplastic - Single-component special polymer adhesive - Fast-curing and more universal than structual and assembly adhesives - Especially for the punctual and all-over adhesion of soundproofing and acoustic elemen...(+) Acoustic Adhesive- For acoustic convoluted, pyramids and basotect - Solvent-free - Elastoplastic - Single-component special polymer adhesive - Fast-curing and more universal than structual and assembly adhesives - Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam - Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood - 310 ml/ 490 g Cartridge - For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over) - Note: Working temperature 5° C to 50° C - Storage: Cool and dry at 5° C to 25° C - Skin building time: 10 - 15 min - Colour: White - Consistency: Pasty - Base: Polymer dispersion - Spec. mass: approx. 1.58 g/ cm - Protect from frost and heat - Suitable hand-held cartridge gun: Art.417630 (not included) |
|
| Clearsonic : H10.5 (HNG-AX12) Hinge Hinge Section- For connecting Clearsonic AX12 panels - Length: 266 mm |
|
| Clearsonic : H16.5 (HNG-AX18) Hinge Hinge section- For connecting A18 panels - Length: 419 mm |
|
| Clearsonic : Base Channel
(1 comments)Floor-end profile- For Clearsonic acrylic panels - Length: 546 mm |
|
| Clearsonic : HCNL "H" Channel
(3 comments)Connection Profile; "H" Channel- Connection profile to extend a panel with an extension panel - 600 mm Long |
|
| Clearsonic : H22.5 (HNG-A2 /A18) Hinge
(3 comments)Joint profile- For connecting the A2 / A18 panels - 568 mm long |
|
| Vicoustic : Flexi Glue Ultra
(1 comments)Vicoustic Flexi Glue Ultra; one-component glue, quick curing and universally applicable as construction and assembly adhesive; plasticizer-free; optimized for good initial adhesion;, skin formation: approx. 25 min; compatible Caulking Gun: #417630 |
|
| Auralex Acoustics : Tubetak Pro Liquid
(65 comments)Glue- Water-based glue for studio foam and diffusers (depending on the thickness) - Cartridge can be used with a standard silicone syringe - 1 tube is enough for up to 3 square metres |
|
| the t.akustik : HiLo-N70
(200 comments)
Convoluted Foam Absorber- Material: HiLo-F acoustic foam from polyurethane with high stiffness and low density - Stud height: 40 mm - Total height: 70 mm - Bulk Density: 16,5 ± 1,0 kg / m³ - Compression load at 40%, deformation 4.0 ± 0.7 kPa - Tensile strength min 100 kPa - Elongation min 80 % - Fla...(+) Convoluted Foam Absorber- Material: HiLo-F acoustic foam from polyurethane with high stiffness and low density - Stud height: 40 mm - Total height: 70 mm - Bulk Density: 16,5 ± 1,0 kg / m³ - Compression load at 40%, deformation 4.0 ± 0.7 kPa - Tensile strength min 100 kPa - Elongation min 80 % - Flame retardant according to MVSS 302 < 100 mm/min - Dimensions: 1000 x 500 x 70 mm - Price per piece - Suggested fixing method: Acoustic adhesive Article Nr. 177265 |
|
| Eagletone Msi 5 Paire De Mousses D'isolation D'enceintes News
(4 comments)Prevent vibration and resonance from reaching your loudspeakers thanks to this foam system especially designed for your monitoring speakers. Several sizes available. - Shipped as a pair - Dimensions: 170 × 300mm - Height: 40mm - 2 possible setups (horizontal or slanted) - Color: anthracite |
|
| the t.akustik : HiLo-P80
(554 comments)
Pyramid Foam Absorber- Material: HiLo-F acoustic foam from polyurethane with high stiffness and low density - Pyramid height: 60 mm - Total height: 80 mm - Bulk Density: 16,5 ± 1,0 kg / m³ - Compression load at 40%, deformation 4.0 ± 0.7 kPa - Tensile strength min 100 kPa - Elongation min 80 % - Fla...(+) Pyramid Foam Absorber- Material: HiLo-F acoustic foam from polyurethane with high stiffness and low density - Pyramid height: 60 mm - Total height: 80 mm - Bulk Density: 16,5 ± 1,0 kg / m³ - Compression load at 40%, deformation 4.0 ± 0.7 kPa - Tensile strength min 100 kPa - Elongation min 80 % - Flame retardant according to MVSS 302 < 100 mm/min - Dimensions: 1000 x 500 x 80 mm - Price per piece - Suggested fixing method: Acoustic adhesive Article Nr. 177265 |
|
| Vicoustic : VicFix Metallic
(2 comments)Wall Mounting System for Acoustic Elements- Mounting plate to attach an acoustic element to the wall - Allows easy attachment and replacement of an acoustic element - Dimensions: 70 x 55 mm - Weight: 0.2 kg - Units per box: 10 |
|
| the t.akustik : Micscreen flex Mini
(208 comments)
Portable Absorber Made of PU Foam- Reduces the transmission of unwanted influences of space such as reflections and echoes from microphone - Equally suitable for studio, live applications, vocals and instrument recordings - Quick and easy installation to almost any standard microphone stand - Dimens...(+) Portable Absorber Made of PU Foam- Reduces the transmission of unwanted influences of space such as reflections and echoes from microphone - Equally suitable for studio, live applications, vocals and instrument recordings - Quick and easy installation to almost any standard microphone stand - Dimensions: 350 x 250 x 60 mm - Weight: approx. 95 g - Microphone and stand not included |
|
| Clearsonic : H34 (HNG-A3) Hinge Hinge Section- For connecting Clearsonic A3 panels - 865 mm long |
|
My account (login)
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
MICROPHONES
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
