4x t.akustik Highline A1 Silver Spruce Absorber Set
- Optimises room acoustics
- Main frequency range: approx. 400 to 3150 Hz
- Material: Polyester acoustic foam
- Flame retardant in accordance with FMVSS 302; Burning rate: < 100 mm/min
- Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm
- Colour: Anthracite / Silver Spruce
- Set contents: 6 Absorber panels

4x t.akustik Diffusor Manhattan GR eps set Diffuser Acoustic Elements
- Made of hardened EPS foam
- For optimising room reflections and room sound
- Suitable for recording studios, radio stations, home recording, and hi-fi rooms
- Effective range: Approx. 900 - 3,250 Hz
- Easy assembly and disassembly
- Dimensions: 600 x 600 x 150 mm
- Box contains 2 units as a kit including assembly instructions
- One kit consists of 13 single elements
- Colour: Graphite

23x t.akustik Highline CBT1 Silver Spruce Corner Bass Traps
- Absorber for optimizing room acoustics
- Especially suitable for the absorption of low-frequency sound waves
- Material: Polyester acoustic foam
- Main frequency / effective range 80 to 1000 Hz
- Flame-retardant according to FMVSS 302 Burn rate <100 mm / min
- Dimensions: 370 x 370 x 600 mm
- Colour: Anthracite / silver spruce
- Shipping quantity: 2 Pieces

Thomann Hand-Kartuschenpistole Hand sealant gun
- For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
- Hexagonal plunger rod
- Red lacquer finish

15x t.akustik Contact Glue Acoustic Adhesive
- For acoustic convoluted, pyramids and basotect
- Solvent-free
- Elastoplastic
- Single-component special polymer adhesive
- Fast-curing and more universal than structural and assembly adhesives
- Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
- Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
- 310 ml/ 490 g Cartridge
- For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
- Note: Working temperature + 5° C to + 50° C
- Storage: Cool and dry at + 5° C to + 25° C
- Skin building time: 10 - 15 min
- Colour: White
- Consistency: Pasty
- Base: Polymer dispersion
- Spec. mass: Approx. 1.58 g/cm
- Protect from frost and heat
- Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
- New follow-up product: Article Nr. 481723 (not included)