Tascam SB-16D; Dante Stagebox; Dante-enabled stagebox and audio interface with 16 analog audio in- and outputs; up to 96kHz sample rate at 32bit resolution; redundant Dante operation using primary/secondary lines; with etherCON compatible connectors; support for Dante Domain Manager; AES67 compatible; Data transfer compliant to SMPTE 2110; GPIO interface with eight in- and outputs, expandable to 16 in- and outputs when connected to Sonicview mixer; selectable LED brightness; selectable reference level; analog in-/outputs: 16x Mic/Line input (3-pin XLR, balanced) with switchable phantom power (48Volt) and status LED for input signal and overload, input impedance: = 5kO; 16x Line output (3-pin XLR, balanced) with status LED for output signal, output impedance: = 100O; digital in-/outputs: 1x Dante Primary, 1x Dante Secondary (compatible with etherCON CAT5e), number of audio channels: 64 (48kHz) / 32 (96kHz); 1x GPIO (Sub-D25); equivalent input noise (mic preamp): = -128dBu; frequency range (mic/line or Dante input to line output): 20Hz - 20kHz, +0dB / -0.5dB (48kHz); 20Hz - 40kHz, +0dB / -1.0dB (96kHz); supported modes: redundancy and switching mode; fully controllable from connected Sonicview mixer; DC input for redundant power supply (DC power supply not included); remote control and offline editing using Tascam IO Control software; included in delivery: power cable, set of rack brackets, set of screws for rack mounting, registration guide Tascam ID and user manual; Format: 3U; Dimensions with feet (W × H × D): 454 × 140 × 180mm; Weight: 4.5kg