the t.bone TWS 16 PT 600 MHz UHF Wireless System- 9.5" Diversity receiver- Bodypack transmitter (line/mic switchable) with 3-pin mini XLR connection (AKG compatible)- 16 Switchable frequencies (606 MHz - 630 MHz)- 3 Systems can be simultaneously used- Adjustable squelch- Jack output- Ext. power adapter (DC 12V/500mA)- Included accessories: 9.5" Rack mount (Only in conjunction with a second TWS16!), guitar cable: 1 m- Note: Frequency range specifically for UK the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Sax Clip Modular saxophone microphone clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Also suitable for trumpet, trombone etc.- Not suitable for soprano saxophone

the t.bone free solo PT 823 MHz Wireless System for Guitar or Bass- UHF wireless system with a pocket transmitter- 8 Pre-programmed frequency groups with 8 available channels each- 1 User channel- Adjustable squelch with threshold display on the receiver- Frequency scan in the receiver- Adjustable AF output- Adjustable transmission power: 5 mW, 10 mW, 20 mW- Infrared transfer of the settings from the receiver to the transmitter- Pilot tone- Increments of 25 kHz- Housing: 9.5", 1 U with 2x BNC outputs for antennas- XLR- and jack output- Operates with a 12 V, 0.5 A DC power supply (positive polarity (+) inside)- Transmitter housing: Plastic- 3-Pin TQG male connector- LCD display- Operates with 2x AA batteries or rechargeable batteries (not included)- Frequency band: 823 - 832 MHz- Includes a guitar cable, plastic case and rackmount- Optional antenna converters available under Article Nr 177448 (not included) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Sax Clip Modular saxophone microphone clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Also suitable for trumpet, trombone etc.- Not suitable for soprano saxophone

the t.bone free solo PT 600 MHz Wireless Systems for Guitar and Bass- UHF wireless system with a pocket transmitter- 14 Pre-programmed frequency groups with 15 available channels each- 1 User channel- Adjustable squelch with threshold display on the receiver- Frequency scan in the receiver- Adjustable AF output- Adjustable transmission power: 5 mW, 10 mW, 20 mW- Infrared transfer of the settings from the receiver to the transmitter- Pilot tone- Increments of 25 kHz- Housing: 9.5", 1 U with 2 BNC outputs for antennas- XLR- and jack output- Operates with 12 V, 0.5 DC power supply (positive polarity (+) on the inside)- Transmitter housing: Plastic- 3 TQG male connector- LCD display- Operates with 2 AA batteries or rechargeable batteries (not included)- Frequency band: 596 - 620 MHz- Includes a guitar cable, plastic case and rackmount- Optional antenna converters available under Article Nr 177448 (not included) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System- Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Sax Clip Modular saxophone microphone clip for Ovid systems- Easy to install without tools- Black rubber end caps protect the instrument from damage- Locking screw- Also suitable for trumpet, trombone etc.- Not suitable for soprano saxophone

The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)- The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters- Tailored frequency response for open, natural sound reproduction- Compact, lightweight construction provides a low degree of visibility- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning- Legendary Shure ruggedness and reliability

BG FranceBG propose dès à présent une gamme d'étui pour émetteur de micro pour instrument à vent.L'étui pour émetteur HF, avec deux bandes élastiques antidérapantes (une pour le saxophone alto, une pour le saxophone ténor), est la solution idéale pour fixer votre équipement au pavillon de manière sécurisée. Il offre également la flexibilité de détacher le boîtier en un instant grâce à son système d attache rapide et fiable en velcro. Ce design ingénieux combine esthétique et sécurité, garantissant une performance impeccable sur scène.