See all Manley
Description from Woodbrass :
From America's premier high-end studio gear manufacturer, the Manley FORCE bursts into 2015 with four channels of vacuum tube microphone preamplifiers extracted from the hugely popular and award winning Manley CORE®, housed in an exquisitely gorgeous chassis, meticulously hand-crafted, purposefully and efficiently California built. Each Channel Features: 48V Phantom power switch 120Hz High Pass Filter switch Phase Invert switch Input Attenuator (Variable Pad) GAIN Selectable Gain LOW vs HIGH Silent Input Level Control (Variable Input Pad) 7-Segment LED Peak Metering 1/4 DIRECT INPUT Similar to the DI in the Manley SLAM!®, and exactly the same as found in the Manley CORE®, this all-discrete solid-state circuit with 10 Meg Ohm input impedance is perfect for guitars, bass, keyboards, etc. Specifications Vacuum Tubes: 4 x 12AX7WA dual triodes Balanced Transformer Coupled XLR Microphone Input Impedance: 1250 Ohms Unbalanced 1/4 Direct Input Impedance: 10 Meg Ohm Maximum Input Mic input (Low Gain Setting): -5 dBu or 435mV RMS @ 0.5% THD Maximum Input Mic input (High Gain Setting): -25 dBu or 44mV RMS @ 0.5% THD Maximum Input Direct input (Low Gain Setting): 24 dBu or 12V RMS @ 0.5% THD Maximum Input Direct input (High Gain Setting): 17 dBu or 5.5V RMS @ 0.5% THD Maximum Output (1kHz Sine, into 100 kOhm load, 0.1% THD N: 35 dBu Maximum Output (1kHz Sine, into 100 kOhm load, 0.1% THD N: 43V RMS Maximum Output (1kHz Sine, into 600 Ohms load, 0.1% THD N): 22 dBm Hi-current WFDRIVE Balanced Output Impedance: 50 Ohms Output Headroom (referenced to 4 dBu): 31 dB Dynamic Range: 118 dB @ LOW GAIN, 100 dB @ HI GAIN THD and Noise (1Khz @ 4dBu BW 22Hz-22KHz): 0.004% at Low Gain setting THD and Noise (1Khz @ 4dBu BW 22Hz-22KHz): 0.04% at Hi Gain setting Noise Floor Micpre (A WGT): - 85dB @ LOW GAIN, -66dB @ HI GAIN Signal to Noise Ratio (Ref. to 4dBu): 87dB @ LOW GAIN, 68dB @ HI GAIN EIN (22-22kHz BW, A WGT): -129dB with 150 Ohm source impedance @ LO GAIN Frequency Response: 20 Hz to 20 kHz -0.1dB, 0.3 dB Gain via Microphone Input: 40 LOW or 50dB HI GAIN (60dB available via internal jumper) Gain via Line Input: 20 or 30dB (40dB available via internal jumper) Low Signal Green LED (Output Level): -22 dBu High Signal Red LED (Output Level): 24 dBu AUTOMUTE warmup delay: 30 seconds Power consumption: 36 Watts Operating mains voltage: 90 to 254 VAC (internal universal supply) Mains Voltage Frequency: 50~60Hz Dimensions: 19 x 3 1/2 x 7 (occupies 2u) Unit weight: 8.6 lbs. Shipping weight: 11.8 lbs.
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
