Video :
See all DPA
Description from Woodbrass :
The d:facto Vocal Microphone is engineered especially for vocal performances onstage. It captures electrifying stage performances and accurately replicates a singer's voice transparently, consistently and thrillingly. The mic is optimized for use in sound reinforcement as well as recording applications. It offers natural sound, high separation from nearby sound sources and SPL handling up to 160 dB. The phantom-powered DPA handle has a sleek look and state-of-the-art electronic design. And, if you decide to go wireless, you can just switch to an adapter for wireless at a quarter of the cost of a new microphone. The modular nature of the d:facto series allows you to switch both the capsule as well as the adapter. The d:facto Supercardioid Capsule features an isolation-optimized supercardioid polar pattern. It is specifically designed to augment the human vocal range. This VIP (Voice Isolation Pattern) uses directional characteristic from the best of two worlds both cardioid and supercardioid patterns. The capsule s directional pattern and definition gives high separation and true sound color onstage. It is ideal for PA amplification and recording. Frequency response and phase, both on- and off-axis, is linear. You can remove the capsule and replace it with any other d:facto or d:dicate capsule if your needs change. The mic also features a robust three-stage pop protection grid built into the microphone that removes unwanted noise. Although this version of the d:facto Vocal Microphone comes with a d:facto Handle for a wiredsolution, the d:facto Vocal Microphone is also the perfect choice to use with your favorite wireless system. Features: - Extraordinarily natural sound - Perfectly uniform supercardioid directionality - High separation - Extreme SPL handling: 160 dB - Low handling noise - Sleek design - Flexible adapter system fits most professional wireless systems - Clip for the microphone Specifications: - Directional characteristics: Supercardioid - Principle of operation: Pressure gradient - Cartridge type: Pre-polarized condenser - Frequency range: 20 Hz - 20 kHz - Frequency range, ± 2 dB: 100 Hz - 16 kHz with 3 dB soft boost at 12 kHz. Permanent 3rd order low-cut filter (-3 dB at 80 Hz) - Sensitivity, nominal, ± 2 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa - Equivalent noise level, A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) - S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 75 dB(A) - Total Harmonic Distortion (THD): 50 dB at 1 kHz - Power supply: 48 V Phantom power (± 4 V) - Current consumption: Max 2 mA - Connector: XLR-3M. Pin 1: shield, Pin 2: signal phase, Pin 3: - phase - Color: Matte black - Weight: 309 g (10.9 oz) - Microphone diameter: 52 mm (2.05 in) - Capsule diameter: 19 mm (0.75 in) - Microphone length: 205 mm (8.1 in) - Output voltage, RMS: 8 V - Polarity: V at pin 2 for positive sound pressure - Temperature range: -40 to 45°C (-40 to 113°F) - Relative Humidity (RH): Up to 90%
GUITAR & BASS
DRUM & PERCUSSION
PIANO & KEYBOARD
BRASS & WIND
VIOLIN & TRAD.
STUDIO
SOFTWARES
PA
LIGHTING
DJ
VIDEO
EFFECTS
FLIGHTCASES
CABLES
ACCESSORIES
KIDS
GIFT
