Free sheet music
My account (login)

GUITAR
FREE SHEET MUSIC SHEET MUSIC STORE DIGITAL SHEET MUSIC MUSIC EQUIPMENT GIFT IDEAS


See all TAD (Brand page)
By Brands› Dunlop (210)› Harley Benton (162)› Addario (105)› Goldo (65)› Pyramid (53)› Ernie Ball (25)› Fender (23)› Maxpic (18)› Savarez (18)› Augustine (17)

By Shop

MENU GUITAR
INSTRUMENTS :

STRINGS :

ACCESSSORIES :

GIFTS :

Most consulted brands for GUITAR


Search Musical Equipment
Active filters for search:
 
Sorted and Filters :
63 accessories found - results for FRANCE (Change geographical area)
TAD : Capacitor 100nF 630VDC Mustard
TAD : Capacitor 100nF 630VDC Mustard
(16 comments)
Capacitor- 100 nF (0.1 uF)
TAD : Cap Orange Drop 22nF 600V
TAD : Cap Orange Drop 22nF 600V
(116 comments)
Capacitor- Legendary capacitor for guitar tone controls - Excellent sound quality - Made of high quality polyester - 22 nF (0.022 uF) - Especially suitable for humbucker pickups
TAD : Capacitor 47nF 630VDC Mustard
TAD : Capacitor 47nF 630VDC Mustard
(37 comments)
Capacitor- Mustard - 47 nF (0.047 uF) - High-quality capacitor for adjusting the sound of electric guitars - 47 nF is the most common value for tone potentiometer capacitors - Dimensions (L x W x Ø): 22 x 11.5 x 0.8 mm
TAD : Capacitor 22nF 630VDC Mustard
TAD : Capacitor 22nF 630VDC Mustard
(28 comments)
Capacitor 630VDC- Mustard - 22 nF (0.022 uF) - High-quality condenser for sound control of electric guitars and amplifiers - Dimensions (L x W x D): 22 x 8.5 x 0.8 mm
TAD : Capacitor 2.2nF 630VDC Mustard
TAD : Capacitor 2.2nF 630VDC Mustard
(27 comments)
Capacitor- 2.2 nF (0.0022 uF) - The low capacitance results in a higher low-pass frequency with a more subtle treble attenuation in electric guitar tone controls - Dimensions (LxBxØ): 22 x 7.5 x 0.8 mm
TAD : Cap Orange Drop 47nF 600V
TAD : Cap Orange Drop 47nF 600V
(91 comments)
Capacitor- Legendary capacitor for guitar tone controls - Excellent sound quality - Made of high quality polyester - 47 nF (0.047 μF) - Especially suitable for single coil pickups
TAD : Footswitch Momentary SPST
TAD : Footswitch Momentary SPST
(44 comments)
Footswitch with 2 Solder Terminals- Key function "ON" - Installation diameter: 12 mm
TAD : A500k Log Alpha Poti
TAD : A500k Log Alpha Poti
(15 comments)
Potentiometer without Knurled Shaft- 6.3 mm Solid metal shaft - 3/8" US Thread - 3x Solder connections - Includes nut and washer
TAD : Poti Knob Black/Chrome
TAD : Poti Knob Black/Chrome
(74 comments)
Potentiometer Rotary Knob- Screwed - Hat shape - For axle diameters of 6.0 - 6.3 mm - Colour: Black / Chrome - 1 Piece - Height: 1.6 cm - Diameter (bottom): 3.0 cm - Diameter (top): 1.4 cm
TAD : Poti 250k 6,3 mm Split Shaft
TAD : Poti 250k 6,3 mm Split Shaft
(21 comments)
Potentiometer- 250k, 6.3 mm Knurled shaft - Logarithmic - 24 Teeth - Spilled shaft - Solder lug terminals for traditional wiring - Thread length: 9.5 mm - Thread diameter: 3/8" (9.53 mm) - Tin-plated housing for easy soldering (classic wiring at Fender and many more) - Incl. 2x washers, 2x nuts
TAD : Poti 500k 6,3 mm Split Shaft
TAD : Poti 500k 6,3 mm Split Shaft
Potentiometer- 500k - 6.3 mm Knurled shaft - Logarithmic - 24 Teeth - Split shaft - Solder lug terminals for wiring - Thread length: 9.5 mm - Thread diameter: 3/8" (9.53 mm) - Tinned housing for easy soldering (traditional wiring for Fender and many more) - Incl. 2x washers, 2x nuts
TAD : JJ ECC83S/12AX7 Tube
TAD : JJ ECC83S/12AX7 Tube
(690 comments)
Tube- JJ tube (Tesla Remake) new version - Very balanced and low noise - Cost-performance winner for Hi-Fi applications
TAD : JJ 12AU7/ECC82 Tube
TAD : JJ 12AU7/ECC82 Tube
(87 comments)
Preamp Tube- Type: JJ 12AU7 / ECC82 - Double triode with medium gain - Very smooth and defined sound
TAD : 500k Push/Pull Poti
TAD : 500k Push/Pull Poti
Push/Pull Potentiometer- Logarithmic - Long thread - With knurled shaft - Thanks to the dual switch, many combinations are possible such as series/parallel, out-of-phase, coil tab etc. - Diameter: 16 mm (5/8") - Thread length: 19 mm (3/4") - Required bore diameter: 9.5 mm (3/8")
TAD : RT008 Tube ECC83 WA
TAD : RT008 Tube ECC83 WA
(278 comments)
Tube- Emphasizes the warm mids and produces a round sound with rich harmonics - Clean tones received a decidedly plump and warm sound with very good and direct response - Overdrive tones feature a powerful boost from the centers - Smooth top - Full gain - Fat mids - Thicker, fuller sound - Tight low
TAD : JJ ECC832/12DW7 Tube
TAD : JJ ECC832/12DW7 Tube
(18 comments)
Preamp Tube- Double triode with 100/17x gain (Ecc83 / ECC82) for Ampeg as a replacement 12DW7 - Can be used in many guitar amps to power the Gain weight to drive the power amp (master) further into saturation - Noise is significantly reduced! - Good all-tube for creamy "Womanizer-Sound" - Good in co
TAD : Pot for Chrome Wah-Wah
TAD : Pot for Chrome Wah-Wah
Potentiometer for Chrome Wah-Wah- Perfect for VOX Wah-Wahs such as Clyde McCoy - 100 KΩ - Without gear-wheel and hardware
TAD : JJ EL34 Tube
TAD : JJ EL34 Tube
(20 comments)
Tube- JJ EL34
TAD : Solid State Rectifier
TAD : Solid State Rectifier
(22 comments)
Rectifier Tube- Replaces 5U4G, GB, 5AR4, Y3 rectifier tubes by diode rectification - Sound is a little harder (more aggressive)
TAD : RT001 Tube ECC83; 12AX7A-C/
TAD : RT001 Tube ECC83; 12AX7A-C/
(490 comments)
Tube- Punchy sound with good gain, tight basses and silky detailed heights - A true all-rounder with a wide frequency range - The selected quality is recommended for all functions in amps with moderate gain and high gain amps as of 2 - (V2) This tubing is also used by Boogie®, Brunetti®, Die


Cookies allow us to personalize content and ads, to provide social media-related features and analyze our traffic. We also share information on the use of our site with our social media partners, advertising and analytics, which can combine them with other information you have provided to them or collected in your use of their services.
Learn more and set cookiesClose